1)
Give request to SIFY for internet access to PC if mac
binding had been done for that Post office and drop a mail to TCS helpdesk to
delete the pc name from indiapost domain if exists previously before
commencing.
2) First, Activate the windows which came preloaded by
using datacard or other source.(Just provide internet connection(other than
sify to PC for 5 mins ,automatically it gets activated)
3) Uninstall AV if any installed and install TCS AV if
it’s a 64 bit OS make sure you install 64bit AV setup
4) Install SQL 2008 full setup
For error free operation
select startup account as local system account(full privilege)
Else u will get error like
operation system error while attempt to attach DB.
In sql 2008 installation In server configuration give account
name as NT AUTHORITY/SYSTEM for local system
account.
5) Create atleast two partition other than OS and install
all programs other than OS partition.
To create a partition you
must be logged in as administrator
If there is only one
partition(Say 500GB for C) and no unallocated space,u have to repartition it by
shrinking volume of “C” and the procedure is as follows.
i)Run command, Type
diskmgmt.msc , click ok
ii)Right Click on C
partition, Click shrink volume
It will ask for unallocated space (Ex. Give 200 GB)
Now the C partition will be having only 300
GB+unallocated space and then u can create the partition from unallocated space
6) Add the PC to indiapost Domain
AD joining guidelines
Before joining AD,Authorise all
emos, log out all users from Treasury, Speednet, emo modules for avoiding
loggin error due to server name change.
1)First enable the administrator for local computer
Right
Click on Computer /My computer -> Click on Manage -> Expand Local Users
& Groups -> Click on Users -> Check Administrator Account (Built in
account) -> Status should be Enabled& set the password, if not set.
2)If it is a server ,demote from AD.Remove AD and make
it to workgroup
It is a PC,Unjoin from domain
and make it to workgroup
3)Restart the PC and change the name as per naming
procedure
Weg12345DT001 for
pc,WEG12345SR001 for server WEG12345LT001 for laptop
4)Change the preferred DNS 172.19.64.12,
17.19.64.11-18
5)Now join to Indiapost Domain
Username:doplocadmin
Pass:Password@123
6) In run command
type “lusrmgr.msc” Click groups
Add indiapost user
eg 10059415(provided by TCS) to administrator group.
7)Change server ip or name in
i)Counter Database –
Environment table
ii)Postman Database –
Environment table
iii)POSPCC Database –
Environment table
iv)config file in all modules,4
clients, Account mis
v)Point of sale supervisor,
Change the treasury server name
vi)Treasury supervisor, Change
the pos server name in environment
vii)make all modules to run as
administrator (for windows 7)
8) Run command “services.msc”
Start
the service 'Distributed Transaction Coordinator' (MSDTC) with start up type as
'Automatic' and Log On As 'Network Service'
9) Queries to be run for AD issues
i) POS booked articles not fetching in
speednet module SQL 2005/2008.
Run
two queries in following sequence
First
query
a) sp_configure 'show advanced options',1
go
reconfigure
go
reconfigure
Second
Query
b) sp_configure 'Ad Hoc Distributed
Queries',1
go
reconfigure
go
reconfigure
(or)
Right click on server name in SQL
management studio->facets-> surface area configuration.
Set true to Ad hoc remote
queries.
ii)RPC
query
exec
sp_serveroption @server='myserver', @optname='rpc', @optvalue='true' exec
sp_serveroption @server='myserver', @optname='rpc out', @optvalue='true'
6)
Attach all the DBs. Reset Registration
to be done for emo and epay client,if it was installed previously in server
PC(old PC)
7)
Make all the MM modules to run as
administrator for all users.
8)
Check whether ecounter linked server exists
after attaching DB,If not,create by executing POSPCC_COD_14082014.exl from Speed 4.2
9) Install
certificate from CEPT,Mysore for epay,emo,rnet,ems client
10)
Install java ,adobe reader,MS Office,printer settings,
11)
Configure Finacle settings,Java settings after logging onto domain user.
12)
Install startmenu from IObit or Classic shell
Classic shell startmenu
download link
https://drive.google.com/file/d/0Bz5ZqC3ESzJnaXpsQy02MDJDUWM/view?ts=56cdd1ce
13)
Configure Backup plan in SQL server.SQL FTP software can be used for
this purpose.
Backup bat file line for
taking backup of mdb files
SQL backup software full
version google drive link
https://drive.google.com/file/d/0B4S7rSnYPJaRTVNORGhtc1dZbFU/view?pref=2&pli=1